Aerospace CNC Machining Services
HC-Mold machines precision aerospace-type parts in Chang'an, Dongguan: 5-axis milled brackets and housings, turned pins and fittings in aluminum, titanium and stainless steel, held to 0.005 mm and shipped with a 3D measurement report.
Aerospace machining capabilities
| Machines | 50+ CNC machines: 3-, 4- and 5-axis milling, CNC turning, Swiss-type turning |
| Tolerance | To 0.005 mm, depending on feature, material and part size |
| Surface finish | As machined to Ra 0.4 µm |
| Materials | Aluminum 6061 and 7075, titanium, stainless steel, steel, brass, PEEK and other engineering plastics |
| Finishing | Anodizing including hard anodizing, passivation, plating, bead blasting, laser marking |
| Quantity | Prototypes from 1 piece to repeat production lots |
| Documents | 3D measurement report with every order; first article report and material certificates on request |
| Quality system | ISO 9001:2015 (not AS9100) |
Parts we machine
Typical aerospace-type parts for aircraft interiors, UAVs, ground support equipment and test rigs.
Brackets and fittings
Thin-wall aluminum and titanium brackets machined on 5 axes in one set-up for accurate hole positions.
Housings and enclosures
Machined aluminum housings for electronics and sensors, with sealing faces and tapped holes.
Manifolds and fluid parts
Stainless steel and aluminum manifolds with cross-drilled passages and threaded ports.
Pins, shafts and bushings
CNC and Swiss-type turned parts in stainless steel and titanium.
Prototypes and test parts
Functional prototypes and fixtures for design validation and test rigs.
Plastic components
PEEK and other engineering plastic parts machined to drawing.
Quality and documentation
Every aerospace-type order is inspected against your drawing and shipped with the measurement data.
- First article dimensional check before production continues
- 3D coordinate measurement of critical dimensions, reported with the shipment
- Material certificates kept with each order for traceability
- NDA signed before any file review; drawings never shared with third parties
HC-Mold works under ISO 9001:2015 and does not hold AS9100 certification. Tell us the documentation your program requires and we confirm what we can provide before quoting.
Examples of precision machined parts
Parts of the type we machine for aerospace and other precision programs.
Aerospace machining FAQ
Do you machine titanium?
Yes. Titanium is machined on our CNC milling and turning centers, together with aluminum, stainless steel and engineering plastics.
What tolerances can you hold on aerospace parts?
Critical features can be held to 0.005 mm, depending on the feature, material and part size.
Are you AS9100 certified?
No. HC-Mold works under ISO 9001:2015, with first article checks, 3D measurement reports and material certificates.
Do you offer 5-axis machining?
Yes. 5-axis milling lets complex brackets and housings be machined in one set-up for better accuracy between features.
Can you make aerospace prototypes from 1 piece?
Yes. CNC prototypes start from 1 piece and typically ship in 3–5 days.
Quote your aerospace part
Free DFM · NDA before file review · reply ≤12h · quote ≤24h on complete RFQ · ISO 9001:2015